WHYTE E-180 RSX MX 2023
|XS CURRENTLY UNAVAILABLE
S CURRENTLY UNAVAILABLE
M CURRENTLY UNAVAILABLE
L CURRENTLY UNAVAILABLE
XL CURRENTLY UNAVAILABLE
|The E-180 RSX is built around Boschâs Performance Line CX 85Nm motor with its four climb-shrinking power modes so you can effortlessly self-shuttle or conquer the most challenging natural terrain; combined with huge 180mm front/170mm rear suspension and MX (29er front/27.5â rear) wheels, the E-180 RSX is ready for sending the biggest lines, jumps, drops and features with total confidence.
The new frameset maximises the advantage of our unique tilted motor and super low-slung battery arrangement, which brings the bikeâs centre of gravity as low as possible, to deliver you ultra-stable, dynamically centred and confident handling at any speed and on any terrain ??" so you can corner on rails and not high-side wide ??" while short 165mm cranks deliver maximum pedal control and ground clearance.
We optimised the suspension to be ultra-sensitive and reactive for traction but still support the e-bike weight super well through G-outs and the biggest berms; we also tweaked our Total Geometry system and used an MX wheel set up so the E-180 plays and slays on the tightest, steepest tracks but still has your back when youâre flat out through boulder fields with handling thatâs agile and alive for maximum fun.
The extra-large 750Wh battery gives hour after hour, run after run on the biggest tracks and bike park lines, with a unique slide-out system for fast home charging removal and smaller battery options. Our innovative in-tube design is far stronger and stiffer than open tube frames, surviving almost metric ton slam loads in testing so you can feel totally safe full-sending on the hill.
|Bosch Performance Line
|Bosch 750 Wh internal PowerTube
Reaches full charge in 4.9 hours with supplied 4A Standard Charger
(or only 3.7 hours with optional aftermarket Fast Charger)
|Bosch bar display
|6061 Alloy, Hydro Formed T6 Aluminium, Multi Butted, Custom Drawn, Tapered Headtube, Internal BBX Cable Routing for Dropper Post and 12mm X 148mm Boost Dropouts
Fox Float X2, Factory, independently adjustable Compression and Rebound damping, Kashima coating
|Fox Float 38, Factory 29"", 180mm Travel, 44mm Offset with Grip 2 Damper and custom tune, Tapered Steerer, Kashima Coating, 110mm x 15mm Boost, E-Thru Axle
|SRAM X01 Eagle AXS 12 Speed, with Battery Protector
|SRAM XO1 Eagle AXS 12 Speed
|Race Face Affect E-Bike, 165mm, ISIS with X-SYNC Direct Mount 34T for Bosch Gen 4, Black
|SRAM XG-1275 Eagle, 10-50, 12 Speed
|SRAM Code RSC, 4 Pot with Sintered Metal Pads, 220/200mm Rotor
|Maxxis Assigai WT, TR, 27.5" x 2.5" 120TPI, EXO + Sidewall Protection, 3C Maxx Terra, Dual Compound, Folding Bead, Front, Maxxis Assigai WT, TR, 27.5" x 2.5" 120TPI, Double Down casing, 3C Maxx Terra, Dual Compound, Rear
|Hope Fortus 30, Tubless Ready, 32 Hole
|Race Face Turbine R, 35mm Rise, 35mm Bar Bore, 800mm Wide
|Race Face Atlas, 35mm Bar Bore, 35mm Extension
|Whyte Custom, Triple Panel Design
|Crank Bro High-Line 3, 30.9mm, M/L 150mm Travel, High-Line Ball Socket Remote Lever
As with any product, specification is subject to change without prior notification. You are advised to confirm current specification before buying.