MRP Ribbon Coil 29"/27.5+ 150

Discerning riders have long sworn by the performance, durability, and consistency of coil suspension.
While the industry moved away from coil springs in favour of air for its light weight and simple, broad tunability, these coil aficionados dreamt of a fork that combined coil's advantages with the latest in chassis and damper technology. MRP delivers just that with the new Ribbon Coil.

Ribbon Coil features:

• 4.6, 4.65 lbs. (27.5”, 27.5+/29”)
• 150-170mm 27.5”, 140-160mm 27.5+/29” (internally adjustable)
• Externally adjustable preload and Ramp Control™
• 3 springs included, 2 additional springs available separately.

Standard Ribbon features:

• Outcast™ arch design
• New bladder-free EssenTTial™ damper utilizing a low-pressure IFP.
• PSST pressure-relief valves
• “Boost” spacing
• QR15 or bolt-on axle
• 10 decal colours and patterns


The Ribbon Coil gives you the spring tunability and stroke control previously found only with air, while giving you the supple linear spring curve, lower friction, longer service life, and consistent feel that you get with a coil spring.

This, in a package with a negligible or even nonexistent weight penalty over air forks in its class.
Every Ribbon Coil ships with three standard spring rates (soft, medium, and firm) and two additional springs (extrasoft and extra-firm) are available separately. The full range of springs covers riders from 125-250 lbs. Fine-tuning of spring rate comes courtesy of an external preload adjustment.
Included with the Ribbon Coil is MRP's acclaimed Ramp Control™ system; a speed-sensitive ending-stroke adjustment that allows you quickly and easily isolate and tune your preferred amount of bottom-out support on-thefly.

Just 203 g (0.45 lbs.) heavier than the air-sprung Ribbon, the Ribbon Coil's 4.6 lb. weight bests many of its air-sprung competitors and beats aftermarket coil-converted forks. It's an easily justifiable compromise for hard-charging trail riders and park rats in exchange for consistent and impeccable performance, day-in and day-out.

Like all MRP forks, the Ribbon Coil is precisely assembled in MRP's Grand Junction, Colorado factory.
All forks undergo a rigorous QC process, that includes individual dyno testing, before arriving in the hands of end users. Like its air-sprung sibling, the Ribbon Coil is offered in two chassis sizes (27.5” or 27.5+/29”) with ten standard decal colour options, and with either QR-style or bolt-on 15x110 axles. With the addition of either coil or air-spring, and the above options, MRP suspension is truly the suspension of choice for those that demand the best.

Pink Bike suspension product of the year 2017